航空模型的存放也很講究。主要原因是航空模型的制作比較復雜，所以我們平時需要多加注意。那么航空模型的存放和擺放需要注意什么？下面我們來梳理一下。

The storage of aviation models is also very particular. The main reason is that the production of aviation model is complex, so we usually need to pay more attention. What should be paid attention to in the storage and placement of aviation models? Let's sort it out.

1、禁止將航模放置在空中

1. It is forbidden to place the model aircraft in the air

應放置在兒童不易觸及的地方。如果飛機模型墜落，飛機模型和人都會受到損壞。

Keep out of reach of children. If the aircraft model falls, the aircraft model and people will be damaged.

2.無高溫輻照航空模型

2. aviation model without high temperature irradiation

不要長時間暴露在陽光直射或高射燈下，容易造成航模的油漆、輪轂、塑料件氧化。如果發生老化、變形和開裂，橡膠輪胎容易氧化和熱溶解。

Do not expose to direct sunlight or high-altitude lamps for a long time, which is likely to cause oxidation of paint, wheel hub and plastic parts of aircraft models. If aging, deformation and cracking occur, rubber tires are prone to oxidation and thermal dissolution.

3.避免潮濕環境

3. avoid humid environment

鋅合金航空模型如果長時間放置在比較潮濕的地方，由于機身是合金的，容易氧化，航空模型表面容易出現黑點和漆面起泡.因此，將航空模型放置在干燥的地方。

If the zinc alloy aviation model is placed in a humid place for a long time, because the fuselage is alloy, it is easy to oxidize, and the surface of the aviation model is prone to black spots and paint blisters Therefore, it is best to place the aerial model in a dry place.

4.輪胎懸空放置

4. place the tire in the air

不同航空模型廠家生產的模型重量不同。如果要長時間放置航空模型，可以使用有機玻璃或小木塊將輪子抬高，以防止輪子粘在底座上。

The weight of models produced by different aircraft model manufacturers is different. If you want to place the aerial model for a long time, you can use Plexiglas or small wooden blocks to raise the wheels to prevent the wheels from sticking to the base.

5.留下包裝盒

5. leave the box

大型航空模型制作廠家認為這不僅影響航模的觀賞度，更重要的是，將直接影響航模收藏價值和轉售。

Large aviation model manufacturers believe that this will not only affect the appreciation of the model, but also directly affect the collection value and resale price of the model.

此外遠離直接火源。重要的是要遠離直接火源，并注意滅火活動。航模完成并完全安裝后，以后的使用和維護非常重要。否則，將難以獲得預期的結果并隨后進行維修。要管理模型，您還需要注意一些細節，航模人員需要了解這些細節。

In addition, keep away from direct ignition sources. It is important to keep away from direct fire sources and pay attention to fire fighting activities. After the aircraft model is completed and completely installed, it is very important to use and maintain it in the future. Otherwise, it will be difficult to obtain the expected results and then carry out maintenance. To manage the model, you also need to pay attention to some details, which the aircraft model personnel need to understand.

以上就是對這篇文章的內容，看完這篇文章，你可有收獲？我們網站還有很多的相關內容的詳細描述，如果你想了解更多，歡迎關注我們的網站。

The above is the content of this article. After reading this article, do you have any harvest? There are many detailed descriptions of relevant contents on our website. If you want to know more, please follow our website www.quanyimoxing com。