模型的配色多以產品的預期效果圖為主，往往有意識地強調某種色調以追求和諧的對比。為了使產品模型更接近實際狀態，在完成模型的組裝、打磨和涂裝后，需要通過一定的視覺手段來達到更真實、更清晰的展示效果。

The color matching of the model is mainly based on the expected effect of the product, and often consciously emphasizes a certain color tone to pursue harmonious contrast. In order to make the product model closer to the actual state, it is necessary to achieve a more realistic and clear display effect through certain visual means after the model is assembled, polished and painted.

模型的視覺表達主要是產品標志、商標、功能系統標志，有的甚是整個企業形象。除了推廣產品，將用戶利益放在首位也是產品視覺傳達的根本目的。

The visual expression of the model is mainly product logo, trademark, functional system logo, and some even the whole enterprise image. In addition to promoting products, putting users' interests first is also the fundamental purpose of product visual communication.

識別設計中字標的所需部分。如果您不確定，您可以先將標記的內容轉移到模型上的適當位置。一般產品模型使用的材料不是性的，容易損壞。為防止具有保存價值的模型損壞，應采取相應的保存方法。

Identify the required part of the word mark in the design. If you are unsure, you can first move the contents of the tag to an appropriate location on the model. The materials used in general product models are not permanent and easy to damage. In order to prevent the model with preservation value from being damaged, corresponding preservation methods shall be adopted.

無論如何存放，一定要注意防潮、防曬、耐高溫、防擠壓，以免變形、褪色。制作軍用坦克模型的常用方法是用高透明塑料片組裝透明罩蓋住模型；或者直接放在透明的玻璃窗中，既可以防止損壞和灰塵掉落，又可以讓人隨時觀看和學習。

No matter how you store it, you must pay attention to moisture-proof, sun protection, high temperature resistance and anti extrusion to avoid deformation and discoloration. The common method of making military tank model is to use high transparent plastic sheet to assemble transparent cover to cover the model; Or directly put it in the transparent glass window, which can not only prevent damage and dust from falling, but also allow people to watch and learn at any time.

大型坦克模型廠家認為，建立光是拍出好坦克模型的關鍵。從產品與環境的關系出發，用紙或布做主色的背景。拍攝時不要直接使用閃光燈，因?yàn)殚W光燈的方向與相機的拍攝角度一致，從正面很難顯示產品本身的體積關系和光影變化，導致沉悶、模糊和缺乏表現力的效果。

Large tank model manufacturers believe that the establishment of light is the key to take a good tank model. Starting from the relationship between the product and the environment, paper or cloth is used as the background of the main color. Do not directly use the flash when shooting, because the direction of the flash is consistent with the shooting angle of the camera. It is difficult to display the volume relationship and light shadow changes of the product from the front, resulting in dull, fuzzy and lack of expressiveness.

因此需要將光源和拍攝方向考慮成一定的角度，一般采用45度左右的角度?？梢愿鶕?jù)產品的各種形態特征和功能區域適當調整出光角度，使產品的結構形式和線性形狀在光影的作用下得到充分體現。

Therefore, it is necessary to consider the light source and shooting direction into a certain angle, generally about 45 degrees. The light angle can be properly adjusted according to various morphological features and functional areas of the product, so that the structural form and linear shape of the product can be fully reflected under the action of light and shadow.

在制作軍事坦克模型之前，還需要知道很多的細節內容，以便在制作模型時少走彎路。如果您想對市場有更深入的了解，請致電我們的網站或?qū)嵉乜疾旃荆?/div>